Fluke 1750/B/ET Basic Power Quality Recorder


A powerful high-capacity and fast-sampling power quality recorder that captures all events and waveforms on all channels all the time. Stand-alone unit – order CTs separately.

SKU: 1750/B/ET Category:


Fluke 1750/B/ET Offers

The Fluke 1750 Power Recorder automatically detects, scales, and powers current probes without needing batteries; once power is applied, the instrument automatically begins recording.


Measure every parameter: voltage and current on three phases, neutral, and ground
Cross-channel and current triggering capture every measurement, on every channel, every time
Intuitive PC software: Easily analyze data and generate reports. Automated EN50160 reporting and compliance.
Plug and play: Set up in minutes with self identifying current probes and single-lead voltage connections
PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
Data is automatically stored on the internal flash memory that can store records for over a month without compression or overwriting
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection
Voice, data, and picture annotations can be made via the PDA to flag important points in the data stream
Certified to meet the stringent safety standards for use in 600 V CAT IV and 1000 V CAT III environments
Includes acquisition unit, PDA wireless “front panel interface” and charger power plug adapters, 4 x 400A current probes (3140R), 5 test leads and clips, SD memory card, Fluke Power View and Fluke Power Analyze software, power cord with international plug set, Ethernet cable, colour localization set, printed Getting Started manual, product CD with software and users manual PDF, and soft carrying case

Long-term Analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction; Power Quality Surveys: Quantify power quality throughout a facility, documenting results with professional reports; Quality of Service Compliance: Validate incoming power quality at the service entrance; Equipment Installation/Commissioning: Benchmark power system prior to install to insure quality of service

Voltage and Current Measurements

Range: 1000 V RMS ? 10 % over range
Accuracy: AC: ?0.2% rdg. ?0.1% f.s., >50V RMS / DC: ?0.5% rdg. ?0.2% f.s., >50V RMS
Voltage Crest Factor: 3 or less
Current Range: Depends on current probe used
Current Crest Factor: 4 or less

Power Measurement

Frequency Range: 42.5 to 69 Hz
Accuracy: ?10mHz (10 to 110 % of range)
Power Factor Range: 0.000 to 1.000
Accuracy: ?1 digit from the calculation of each measured value (?3 digits for total)
Displacement PF Range: -1.000 (leading) to +1.000 (lagging)
Accuracy: ?0.5% rdg. ?2% f.s. ?1 dgt.
Harmonic Analysis: 1st to 50th order
Accuracy: 1st to 20th orders: ?0.5% rdg. ?0.2% f.s. / 21st to 50th orders: ?1% rdg. ?0.3%f.s.

General Specifications

Dimensions: 114 x 57 x 25mm (4.5 x 2.25 x 1.0″)
Weight: 196 g (6.9 oz)

What’s included with the Fluke 1750/B/ET
Fluke 1750/B/ET Basic Power Quality Recorder


There are no reviews yet.

Be the first to review “Fluke 1750/B/ET Basic Power Quality Recorder”

Your email address will not be published. Required fields are marked *