Fluke 789-KIT5 Process Meter Kit – Includes the CA-05A Soft Carry Case, R2001 Infrared Thermometer & the TPAK Magnetic Meter Hanger FREE


The 789 is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. This value added kit includes the REED CA-05A soft carry case, the REED R2001 Infrared Thermometer and the Fluke TPAK Magnetic Meter hanger for FREE.

SKU: 789-KIT5 Category:


The Fluke 789 Offers

Safety rated multimeters with mA source. Now process technicians can do a lot more while carrying a lot less. The ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The Fluke 789 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool.


Source and simulate 4 to 20 mA signals
Simultaneous mA & % of scale readout
CAT IV 600V safety rated 1000V, 440mA true RMS digital multimeter
Large dual backlit display
HART mode setting with loop power provides built-in 250? resistor
Frequency measurement up to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode test and continuity beeper
0% & 100% buttons to toggle between 4 & 20mA sourcing for quick span checks
Manual step (100%, 25%, coarse & fine) plus auto step and auto ramp


Test and Measurement

REED CA-05A Soft Carrying Case

Accommodates medium to large sized instruments
Made of polyester
Adjustable shoulder strap and belt hook
Side compartment for accessories
Internal dimensions (main pocket): 10 x 4.3 x 1.7″ (254 x 109 x 44mm)
Internal dimensions (side pocket): 6.75 x 1 x 1″ (171 x 25 x 25mm)
External dimensions: 10.5 x 5.75 x 2.2″ (267 x 146 x 56mm)
Weight: 4oz (114g)

REED R2001 Infrared Thermometer

Built-in laser pointer identifies target area
8:1 distance to spot size ratio
User selectable ?F or ?C
Fixed emissivity covers 90% of applications
Automatic data hold
Backlit display
Low battery indication and auto shut off

Fluke TPAK ToolPak Magnetic Meter Hanger

Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
9 inch hook and loop strap allows you to loop around pipes
Hook hanger for hanging on non-magnetic surfaces
General purpose hanger allows you to hang your meter on nails, hooks and many other objects
Compatible with many Fluke instruments

Fluke 789 Specifications

Current Measurement
0 to 1A AC or DC
0.2% + 2 LSD (DC)
0 to 30mA
0.001 mA
0.05% + 2 lSD
Current Sourcing
0 to 20mA or 4 to 20mA
0.05% of span
Drive Capability
24V Compliance or 1200? at 20mA
Voltage Measurement
0 to 1000V AC (True-RMS) or DC
0.1mV to 1.0V
0.1% rdg + 1 LSD (V DC)
Electrical Specifications
To 19.999kHz, 0.005% + 1 LSD
Beeps for resistance < 100?
Resistance Measurement
To 40M?, 0.2% + 1 LSD
Diode Test
2.0V shoes diode voltage drop

Click here for complete specifications on the Fluke 789-KIT5


There are no reviews yet.

Be the first to review “Fluke 789-KIT5 Process Meter Kit – Includes the CA-05A Soft Carry Case, R2001 Infrared Thermometer & the TPAK Magnetic Meter Hanger FREE”

Your email address will not be published. Required fields are marked *