Fluke Ti450 SF6 Thermal Imager with Gas Detection, 60HZ


An infrared camera and gas leak detector in one compact tool. Easily change between the two modes when you are in the field with the dependability of the Fluke?s technology. The hard to reach areas are easy to diagnose with the pistol grip comfort and simplicity of the point-and-shoot feature. SF6 leaks are easily detectable without the need to shut down equipment.

SKU: TI450 SF6 Category:



Detects and pinpoints the exact location of the SF6 leak ? without shutting down equipment
Quick entry/exit button allowing quick toggling between gas imaging and infrared mode
320 x 240 resolution for gas and infrared images; SuperResolution increases to 640 x 480, only in infrared mode
Get in-focus images in both infrared and gas modes with a touch of a button with LaserSharp? Auto Focus
Wirelessly connect your camera to the Fluke Connect? system to make faster decisions. Team members can see the same data and collaborate on identifying the problem or authorize work before you’ve left the inspection site.
No need for pencil and notebook:

IR PhotoNotes? annotation system captures digital images of equipment details, e.g. serial numbers and surrounding area conditions
Record any additional notes with voice annotation and save them with the image

See additional details with optional smart lenses ? no calibration required when swapping them between compatible cameras
Optimize images, perform analytics, generate quick, customizable reports and export images to the format of your choice with SmartView? desktop software, included with your purchase
Capture clear, accurate infrared images focused throughout the entire field of view with MultiSharp? Focus
Small and lightweight, fits easily into your tool box


Industrial plants (manufacturing, process, petrochemical, etc)
Commercial buildings and facilities
Government buildings
Electrical, water, and natural gas utilities
Residential dwellings

Gas Leak Images

MultiSharp Focus creates images focused throughout the camera’s field of view

Focus is one of the most important aspects of thermography, and an out of focus image can give you data that can lead to misdiagnosis ? costing you thousands. With the Fluke Ti450, worrying about focus is now obsolete. With MultiSharp? focus, you get images automatically focused throughout the field of view, even if you start from a completely blurry target. That’s because the camera takes multiple images and combines them to give you clear, accurate focus on targets near and far. Simply point and shoot.

Manual focus ? only front pipe in focus.

MultiSharp? Focus produces an image focused throughout the field of view.

Manual focus ? only 1 motor in focus.

MultiSharp? Focus ? front and back motors in focus.

Get instant focus on a single target with LaserSharp? Auto Focus

With the push of a button, a built-in laser distance meter instantly calculates and displays the distance to your designated target, and the focus engine immediately adjusts the focus.

Passive autofocus systems may only capture the near-field subject (fence).

LaserSharp? Auto Focus captures your designated target.

See more detail with SuperResolution

The Ti450 brings 640 x 480 SuperResolution to the awarding winning Ti400 form factor. Now you can see even more detail with 4x the pixel data. SuperResolution captures multiple images and combines them to create a 640 x 480 image.

Regular resolution.

SuperResolution. Get 4x the pixel data ? a 640 x 480 image.

See the impossible with infrared lenses
Infrared lenses can make it possible to inspect targets that would be challenging to see with a standard IR lens due to their size and distance. The Ti450 is compatible with 2x and 4x telephoto and wide angle lenses.

Standard lens.

4x Telephoto infrared smart lens.

Save time with the Fluke Connect? system
You can wirelessly sync images directly from your camera to the Fluke Connect? system, and attach to an asset record or work order. Having access to maintenance records simultaneously at the inspection site and from the office or an off-site location enables faster decision making and real time collaboration between team members. You can also live stream the camera display to your smartphone or PC and remotely control the camera.

Capture and save measurements from your wireless-enabled test tools to the Fluke Connect? app on your smartphone.

Asset analysis dashboard: Easily compare complex data.

Discover your Thermal Imager

Understand the importance of image quality
How to better manage your data
How our tools are designed for your work environments
The ROI you can expect from thermal imaging
Learn the importance of innovative solutions that make it simple and easy to capture
Analyze and manage thermal imaging
Find out why hundreds of professionals choose Fluke thermal imaging

Download the Advanced Thermal Imaging Buyers Guide

Fluke TI450 SF6 Specifications

SF6 gas detection
< 10 lbs annual gas loss rate Excellent outdoor conditions necessary – large temperature difference between gas and background, no wind 10 to 50 lbs annual gas loss rate Good outdoor conditions – moderate temperature difference between gas and background, no wind > 50 lbs annual gas loss rate
Easy detection in moderate conditions
Detector resolution
320 x 240 (76,800 pixels)
SuperResolution on gas mode
320 x 240 (76,800 Pixels)
SuperResolution on infrared mode
640 x 480 (307,200 pixels)
IFOV with standard lens (spatial resolution)
1.31 mRad, D:S 753:1
Field of view
24 ?H x 17 ?V
Minimum focus distance
15 cm (approx. 6 in)
IR Fusion? technology
Yes, on camera – full screen
MultiSharp? Focus
Yes, focused near and far, throughout the field of view
LaserSharp? Focus
Yes, in-focus images with the touch of a button
Laser distance meter
Yes, calculates distance to the target for precisely focused images and displays distance on screen
Wireless connectivity
To PC, iPhone? and iPad? (iOS 4s and later), Android? 4.3 and up, and WiFi to LAN (where available)
Fluke Connect? app compatible?
Yes, connect your camera to your smartphone, and images taken automatically upload to the Fluke Connect? app for saving and sharing
Fluke Connect? Assets optional software
Yes, assign images to assets and create work orders. Easily compare measurement types – whether mechanical, electrical or infrared images – in one location.
Fluke Connect? Instant Upload?
Yes, connect your camera to your building’s WiFi network, and images taken automatically upload to the Fluke Connect? system for viewing on your smartphone or PC
Fluke Connect? tool compatible
Yes, connects wirelessly to select Fluke Connect? enabled tools and displays measurements on camera screen.
IR-Fusion? technology
Adds the context of the visible details to your infrared image
AutoBlend? mode?
Min, Mid, Max IR plus full visible on camera; continously variable in software
Ruggedized touchscreen display
3.5 inch (landscape) 640 480 LCD
Rugged, ergonomic design for one-handed use
Thermal sensitivity (NETD)
? 0.025 ?C at 30 ?C target temp (25 mK)
Filter mode (NETD improvement)
Level and span
Smooth auto and manual scaling
Fast auto toggle between manual and auto modes
Fast auto-rescale in manual mode
Minimum span (in manual mode)
2.0 ?C (3.6 ?F)
Minimum span (in auto mode)
3.0 ?C (5.4 ?F)
Data storage and image capture
Extensive memory options
Removable 4 GB micro SD memory card, 4 GB internal flash memory, save to USB flash drive capability, upload to Fluke Connect? Cloud for permanent storage
Image capture, review, save mechanism
One-handed image capture,review, and save capability
SmartView? software – full analysis and reporting software and Fluke Connect? system
Yes (save up to 5 notes per IR image)
Video recording
Standard and radiometric
Remote display viewing
Yes, see the live stream of the camera display on your PC, smartphone, or TV monitor. Via USB,WiFi hotspot, or WiFi network to SmartView? software on a PC; via WiFi hotspot to Fluke Connect? app on a smart phone ; or via HDMI to a TV monitor
Remote control operation
Yes, through SmartView? desktop software or Fluke Connect? mobile app
Batteries (field-replaceable, rechargeable)
3-4 hours per battery (*actual life varies depending on settings and usage)
Battery charge time
2.5 hours to full charge
AC operation
AC operation with included power supply (100 V AC to 240 V AC, 50/60 Hx)
Temperature measurement
Temperature measurement range
(not calibrated below -10 ?C)
-20 ?C to +1200 ?C (14 ?F to 2192 ?F)
?2 ?C or 2% (at 25 ?C nominal, whichever is greater)
On-screen reflected background temperature compensation
Color Palettes
Standard palettes
8: Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted
Ultra Contrast? palettes
8: Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra
General specifications
Color alarms (temperature alarms)
High temperature, low temperature, and isotherms (within range)
Infrared spectral band
7.5 um to 14 um (long wave)
User-definable spot markers
3 user-definable spot markers
IEC 61010-1: Overvoltage category II, Pollution Degree 2
Electromagnetic compatibility
EIEC 61326-1: Basic EM environmental, CISPR 11: Group 1, Class A
CFR 47, Part 15 Subpart B
0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6
25 g, IEC 68-2-29
Engineered to withstand 2 meter (6.5 feet) drop with standard lens
Enclosure rating
IEC 60529:IP54 (protected against dust, limited ingress; protection against water spray from all directions)

Click here for complete specifications on the Fluke TI450 SF6


There are no reviews yet.

Be the first to review “Fluke Ti450 SF6 Thermal Imager with Gas Detection, 60HZ”

Your email address will not be published. Required fields are marked *