Fluke 6531-20M E DWT Electronic Deadweight Tester, 20 mPa, 3K PSI


Complete hydraulic pressure calibrator used in the laboratories or instrument shop, in the field or in-situations calibrations and tests. Designed to deliver traditional hydraulic deadweight tester performance to cover a wide workload with digital measurement features and convenience.

SKU: 6531-20M Category:


Fluke 6531-20M Offers


No weights to load and unload, transport or send out for calibration
Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
No piston-cylinder changes
No significant sensitivity to level or vibration
Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
Operates in any unit of measure, switching easily from one unit to the next

Fluke 6531-20M Specifications

Pressure Range
Up to 200 MPa (30k psi), depending on configuration
Operating Medium
Shipped dry, standard preparation. Can be filled with diethylhexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil.
Reservoir Capacity
300cc (18″3)
Variable Volume Displacement
3cc (0.18″3), 200 MPa (30,000 psi) maximum
Filling and Priming Pump Displacement
3.7cc (0.23″3)
Power Requirements
To RPM4-E-DWT: 12V DC, 1.2A

To AC to DC Power Supply: 100 to 240V AC, 50/60 Hz
Storage Temperature
-20 to 70 ?C
Operating Temperature
10 to 40 ?C
1 Q-RPT: Approx. 12 kg (26 lbs)

2 Q-RPT: Approx. 14 kg (30 lbs)
Footprint: 41.4 x 37.1cm (16.3 x 14.6″)

Height: 26.9cm (10.6″), 33.6cm (13.2″) to max variable volume handle height
Click here for complete specifications on the Fluke 6531-20M


There are no reviews yet.

Be the first to review “Fluke 6531-20M E DWT Electronic Deadweight Tester, 20 mPa, 3K PSI”

Your email address will not be published. Required fields are marked *