Fluke 721-1610 Dual Sensor Pressure Calibrator


Precision Pressure Calibrator with dual isolated sensors for gas custody transfer applications. Ranges: 16 psi (low) 1,000 psi (high).

SKU: 721-1610 Category:


Fluke 721-1610 Offers


Two isolated, stainless steel, pressure sensors with 0.025% f.s. accuracy
Can be configured by selecting either a 16 psig (1.1 bar) or 36 psig (2.48 bar) low pressure sensor and then adding your choice of 7 high pressure ranges
External pressure module connection supports all pressure modules (29 ranges) for even more measurement capability
Temperature-compensation ensures accuracy in field applications
Pt100 RTD input for temperature measurement, accurate to 0.1?C (0.2?F) (Requires optional RTD probe sold separately)
Measure 4-20 mA signals
Internal 24 V Loop Power Supply can power a transmitter under test
Measure up to 30 V DC
Large graphic style LCD with backlight can be configured to display up to 3 inputs simultaneously (i.e. pressure 1, pressure 2, and RTD or any combination of inputs)
Pressure displayed in the user’s choice of 19 engineering units
Switch test on both pressure inputs, or external pressure module
Operating mode layers support simple measurements to complex applications
Up to five frequently used setups can be stored; last setup automatically recalled on power-up
% error and damping functions

Fluke 721-1610 Specifications
Specifications 1-Year
Low pressure sensor
-14 psi to +16 psi,
-0.97 bar to 1.1 bar
0.001 psi,
0.0001 bar
0.025 % of full scale
High pressure sensor
0 psi to +1000 psi,
0.00 bar to 69 bar
0.1 psi,
0.0001 bar
0.025 % of full scale
General Specifications
Instrument setup recall
Last used on power-up
Operating temperature -10 ?C to +50 ?C
Storage temperature (without batteries) -20 ?C to +60 ?C
2,000 meters
Ingress protection
Power requirements
6.0 v dc
Battery life
>35 hours, typical usage
Batteries required
(4) Standard AA cells
Dimentions (HxWxD)
7.9″ X 4.3″ X 2.3″ (20 cm X 11 cm X 5.8 cm)
03539 kg (1 lb 3 oz)
Connectors/ports pressure
Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
Electrical and Temperature Measurement 1-Year
mA measure
0 to 24 mA
0.001 mA
?0.015% of rdg
VDC measure
0 to 30 VDC
?0.015% of rdg
*Temperature measure (RTD/ Ohms)
-40 ?C to 150 ?C
(-40 ?F to 302 ?F)
0.01 ?C, 0.01 ?F
?0.015% of rdg
?0.02 ohms
?0.1?C (?0.2?F)
?0.25 degC (?0.45
degF) combined uncertainty when using 720 RTD probe accessory
Loop power supply
24 mA @ 24V
*Temperature measurement requires optional Fluke-720RTD Pt-100 RTD probe available as an accessory
Temperature Effect
No effect on accuracy on all functions from 15 ?C to 35 ?C
Add ? 0.002 % F.S./?C for temps outside of 15 ?C to 35 ?C
Available Pressure Engineering Units
psi, bar, mbar, kPa, kgcm2, cmH2O@4?C, cmH2O@20?C, mH2O@4?C, mH2O@20?C, inH2O@4?C, inH2O@20?C, inH2O@60?F, mmHg@0?C, inHg@0?C, ftH2O@4?C, ftH2O@20?C, ftH2O@60?F


There are no reviews yet.

Be the first to review “Fluke 721-1610 Dual Sensor Pressure Calibrator”

Your email address will not be published. Required fields are marked *