Fluke P3125-MPA Oil Deadweight Tester, 0.1 to 110mPa


This oil deadweight tester with a 0.1 to 110mPa range is capable of calibration over a wide pressure range thanks to its dual-piston design.

SKU: P3125-MPA Category:


Fluke P3125-MPA Offers

This has mounted spirit level and adjustable feet.


Pressure ranges to 60,000psi (4,000bar)
0.015% of reading accuracy (0.008% optional)
Single- or dual-piston format
Built-in hand pumps standard
Units can be trimmed to local gravity FOC

Fluke P3125-MPA Specifications

Standard Weight Material
Series 3 non-magnetic austenitic stainless steel

Weight Density

Optional Fractional Weights
Solution heat-treated aluminum

Piston Material
Tungsten carbide with nickel binder


Cylinder Material
Hardened martensitic steel; tungsten carbide (water above 500psi, 35bar)

Thermal Coefficients of Expansion
Oil piston/cylinder: 16.5ppm/?C; water: (above 500psi, 35bar) 11ppm/?C

Test Port Adapters
1/8, 1/4, 3/8 and 1/2 NPT or BSP

Reservoir Volume

Screw Press Displacement

Pump Displacement
4.7cc per stroke

O-Ring Seal Materials
Buna N as standard, Viton and EPDM available
Click here for complete specifications on the Fluke P3125-MPA


There are no reviews yet.

Be the first to review “Fluke P3125-MPA Oil Deadweight Tester, 0.1 to 110mPa”

Your email address will not be published. Required fields are marked *